CONTACT US

AVIMETAL Wechat

METAL POWDERS

Luba
Mobile：+86 15650583707
Email: luba@avimetalam.com

Helen
Mobile：+86 13810251750
Email: helen@avimetalam.com

Additive Manufacturing

Additive manufacturing (AM) or additive layer manufacturing (ALM) is the industrial production name for 3D printing, a computer controlled process that creates three dimensional objects by depositing materials, usually in layers.

产品名称

Other Fe Alloys' Grades

产品描述

Maraging Steel Powder MS1 Spherical Powder

18Ni300 steel is a Fe-Ni alloy with ultra-low carbon content. Its corresponding American grade is M300 and European grade is 1.2709. 18Ni300 steel uses carbon-free or micro-carbon martensite as the matrix and passes through Mo, Co, Ti, Alloying elements such as Al precipitate alloy compounds during the aging process to form ultra-high-strength steel strengthened by the second phase. Compared with traditional steel, 18Ni300 steel has excellent weldability, thermoplasticity, and workability. It has ultra-high strength and good toughness.

Product	Maraging Steel Powder MS1
Particle Size	15~53um/15-45um
Hall Flowability s/50g	16s/50g
Appearant Density g/cm³	4.2
Tap Density g/cm³	4.6
Oxygen	≤300ppm
Mechanical properties at room temperature	Tensile strength	Elongation	Rockwell hardness
	200±50MPa	5±2%	54-56HRC

Note:The printing performance parameters in this table are the data in heat treatment state.

Spherical mould steel powder Corrax(CX)

Corrax (CX) is an age-hardening stainless steel. Compared with other mold steel materials, it has the following advantages:

1. It has excellent corrosion resistance, and heat treatment has no major influence on the corrosion resistance of the material;

2. There is still very good dimensional stability after heat treatment;

3. The hardness range of 34-50 HRC can be reached by heat treatment.

Product	CX mould steel powder
Particle Size	15~53um/15-45um
Hall Flowability s/50g	15s/50g
Appearant Density g/cm³	3.9
Tap Density g/cm³	4.2
Oxygen	≤300ppm
Mechanical properties at room temperature	Tensile strength	Elongation	Rockwell hardness
	1700±50MPa	7±2%	50-54HRC

Note:The printing performance parameters in this table are the data in heat treatment state.

Spherical stainless steel powder SS316L

SS316L is an austenitic stainless steel with excellent corrosion resistance, high temperature resistance and creep resistance. It is widely used in automotive, chemical and other fields.

Product	SS316L stainless steel powder
Particle Size	15~53um
Hall Flowability s/50g	18s/50g
Appearant Density g/cm³	4.18
Tap Density g/cm³	4.76
Oxygen	≤650ppm

Spherical stainless steel powder 17-4PH

17-4PH alloy is a martensitic precipitation hardening stainless steel with good corrosion resistance. It is suitable for making shafts and steam turbine parts.

Product	17-4PH stainless steel powder
Particle Size	15~53um/15-45um
Hall Flowability s/50g	17s/50g
Appearant Density g/cm³	4.0
Tap Density g/cm³	4.6
Oxygen	≤650ppm

Spherical stainless steel powder 15-5PH

15-5PH(PH1) is a martensitic precipitation hardening stainless steel with good processing technology, excellent mechanical properties, resistance to general corrosion environments, and high strength.

Product	15-5PH stainless steel powder
Particle Size	15~53um/15-45um
Hall Flowability s/50g	18s/50g
Appearant Density g/cm³	3.95
Tap Density g/cm³	4.6
Oxygen	≤650ppm

Other Co Alloys' Grades

无